Specialty Archery Peep Housing Ultra Lite Series Non-Hooded*

The Ultra Lite Non-Hooded peep weighs only 7.5 grains – approximately 25% lighter than the original Super Peep housing

Accepts all Specialty Archery 1/8″ and smaller Apertures, Clarifiers, and Verifiers.  Use of Specialty Archery's Dual Aperture Wrench (#210078) is recommended for insertion of Apertures, Verifiers, and Clarifiers.

The peep opening is 3/16″ with no Apertures, Clarifiers or Verifiers installed.

To protect your peep from dust, debris and moisture we recommend the Peep Guard (#PG1-BLK or #PG1-RD).

Available in 37 or 45-degree string angles.  See the String Angle Chart on the Specialty Archery website to determine which string angle is needed for your setup.

Available in Black, Blue, Camo, Green, Pink, Red, Purple and Silver.

Watch the Specialty Archery peep tying video for proper peep installation.

CAUTION: High powered bows create a great amount of vibration. This may loosen Verifiers, Clarifiers and Apertures over time. Tighten before each use. If you hear a buzzing sound, this indicates a loose Aperture. You may use a drop of Vibra-Tite VC 3 (#VC3), Teflon tape, bow wax, or any other non-permanent binding agent on the threads.