Pats Archery


RamRods Archery Vektor Stabilizer Short 13.5"*

  • Price: AUD$200.99
  • Ex Tax: AUD$182.71
  • Availability: Out of Stock
  • Model: RamRods Archery Vektor Stabilizer Short 13.5"*

Available Options:


RamRods Archery Vektor Stabilizer Short 13.5"*

Standard VIBRO-CORE Internal Damping

Features

-VIBRO-CORE Internal Damping – remove unwanted vibration from your shot.
-Spine – ~90
-Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper.
-5/16-24 threads on both proximal and distal endcap.
-7075 Aluminum proximal and distal endcaps.
-Flat slots in proximal endcap for tightening with a wide range of common tools.
-Made in the USA | designed and hand-built by the owners
-30″ Vektor with standard VIBRO-CORE weighs 5.6oz



The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market.

The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.



There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Tags: RamRods Archery Vektor Stabilizer Short 13.5"* Standard VIBRO-CORE Internal Damping Features -VIBRO-CORE Internal Damping – remove unwanted vibration from your shot. -Spine – ~90 -Diameter – Long Rod 0.625″ to 0.5″ Taper Side Rod – 0.5625” to 0.5” taper. -5/16-24 threads on both proximal and distal endcap. -7075 Aluminum proximal and distal endcaps. -Flat slots in proximal endcap for tightening with a wide range of common tools. -Made in the USA | designed and hand-built by the owners -30″ Vektor with standard VIBRO-CORE weighs 5.6oz The Vektor features a taper design, multiple internal damping options and the best combination of stiffness, wind efficiency, and damping that has ever been brought to market. The Vektor front stabilizer begins at an outer diameter of 0.63 inch and sleekly transitions down to a 0.5 inch outer diameter. This allows for more stiffness at the base of the stabilizer where it experiences the most stress, and creates greater wind efficiency at the tip where the stabilizer experiences the highest amount of buffeting and torque from the wind. The Vektor side rods are the same carbon layup as the long rod but feature a 0.56 inch to 0.5 inch taper.