Pats Archery

Elite Archery Compound VERSA Bow Modules Set*

  • Price: AUD$209.51
  • Ex Tax: AUD$190.46
  • Availability: Special Order
  • Model: Elite Archery Compound VERSA Bow Modules Set*

Available Options:


Elite Archery Compound VERSA Bow Modules Set*

**Please note that this does not include the cams**

Please specify the following in the order comment section:

Right or Left Handed

Bow Year and Model

Cam/Module Type / Draw Length required


VERSA MODS

The Versa Mods are the original
Tri Track Mod system that was used on the ASYM Tri Track Cam featured on the KURE, ENKORE, REMEDY, ENVISION, REZULT, REZULT 36. The Versa Mods will only fit on the ASYM tri Track cam system. 

Compatible bows: KURE, ENKORE,
REMEDY, ENVISION, REZULT, REZULT 36.




PERFORMANCE MODS

Performance Mods are designed
to maximize the energy being stored throughout the draw cycle. These Mods will deliver the highest speeds of the three and require the most energy to draw. The Performance Mods will carry the peak weight of the bow further into the draw cycle and may require a stiffer arrow spine due to the rate of acceleration of the arrow on the shot. The performance mods are ideal for someone who wants to maximize the performance and speed of their bow. The Performance Mods include an adjustable letoff with a range of 70% to a max of 90%. 



SMOOTH MODS

also known as “Standard” mods
on the early Versa system

Smooth Mods are designed with
the traditional “Elite” feel. The beginning of the draw force curve will mirror the performance mods, but the smooth mods will start to reduce peak weight around the middle of the draw cycle to allow a more gradual drop into the valley. As you are drawing the bow back you reach a point where you start to run out of strength, this is where the smooth mods start to drop off to provide a natural smooth draw from beginning to end. Smooth Mods are ideal for someone who is willing to give up a few FPS in exchange for an easy draw. The Smooth
Mods include an adjustable letoff with a range of 70% to a max of 90%.



75% MODS

75% mods are designed to
provide more valley at higher holding weights. By designing the mods to max out the letoff at 75% we are able to deliver a more comfortable feel at full draw for those that want to increase their holding weight. The 75% mods will reduce peak weight early in the draw cycle to gradually decrease until you reach full draw. The Speed rating of the 75% mods will be slightly less than the smooth mods. These mods would be ideal for someone who wants to shoot a maximum of 75% letoff, and would like a bow that is easier to hold at the higher holding weights.  The 75% Mods include an adjustable letoff with a range of 60% to a max of 75%.



There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Tags: Elite Archery Compound VERSA Bow Modules Set* **Please note that this does not include the cams** Please specify the following in the order comment section: Right or Left Handed Bow Year and Model Cam/Module Type / Draw Length required VERSA MODS The Versa Mods are the original Tri Track Mod system that was used on the ASYM Tri Track Cam featured on the KURE, ENKORE, REMEDY, ENVISION, REZULT, REZULT 36. The Versa Mods will only fit on the ASYM tri Track cam system. Compatible bows: KURE, ENKORE, REMEDY, ENVISION, REZULT, REZULT 36. PERFORMANCE MODS Performance Mods are designed to maximize the energy being stored throughout the draw cycle. These Mods will deliver the highest speeds of the three and require the most energy to draw. The Performance Mods will carry the peak weight of the bow further into the draw cycle and may require a stiffer arrow spine due to the rate of acceleration of the arrow on the shot. The performance mods are ideal for someone who wants to maximize the performance and speed of their bow. The Performance Mods include an adjustable letoff with a range of 70% to a max of 90%. SMOOTH MODS also known as “Standard” mods on the early Versa system Smooth Mods are designed with the traditional “Elite” feel. The beginning of the draw force curve will mirror the performance mods, but the smooth mods will start to reduce peak weight around the middle of the draw cycle to allow a more gradual drop into the valley. As you are drawing the bow back you reach a point where you start to run out of strength, this is where the smooth mods start to drop off to provide a natural smooth draw from beginning to end. Smooth Mods are ideal for someone who is willing to give up a few FPS in exchange for an easy draw. The Smooth Mods include an adjustable letoff with a range of 70% to a max of 90%. 75% MODS 75% mods are designed to provide more valley at higher holding weights. By designing the mods to max out the letoff at 75% we are able to deliver a more comfortable feel at full draw for those that want to increase their holding weight. The 75% mods will reduce peak weight early in the draw cycle to gradually decrease until you reach full draw. The Speed rating of the 75% mods will be slightly less than the smooth mods. These mods would be ideal for someone who wants to shoot a maximum of 75% letoff, and would like a bow that is easier to hold at the higher holding weights. The 75% Mods include an adjustable letoff with a range of 60% to a max of 75%.