Beiter Serving Shifter Pair*
** Serving Shifter Holder/Keyring is NOT INCLUDED**
The Beiter Serving Shifter is a practical tool, which allows to move the Center Serving or the End Serving on the string (e.g. if you want to move the Nocking Point).
Not only – and much more important! – it allows to „compact“ the serving.
In the picture on the left the Beiter Servin Shifter is mounted on the handy Beiter Tool Clip delivered with it. The Beiter Serving Shifter #1 (white) is made for smaller diameter, the Serving Shifter #2 (black) for larger ones, for Nockgroove #2 or Hunter.
Making your own strings - normally - you can not put enough tension in the serving tool to achieve a very tight serving. Therefor it makes sense to move 3 to 5 windings a time approx 2mm to one direction
you will see that at the end the serving moved much more!! This means that you serving is more compact, tighter and will last longer!
The Beiter Serving Shifter can be stored and carried in the Beiter Tool Clip (the same used for the Beiter String Tool), for example attached to your quiver ready to be used!
You can also buy the Serving Shifter in pairs: you will than get one each #1 and #2 Serving Shifter.. the Tool Clip can than be ordered separately!