BEITER Tri-Liner* Used for Spin WIngs
Used for Spin WIngs
The Beiter Tri-Liner is used to mark the exact position of vanes (like e.g. Spin Wings™, Kurly Vanes™, Rite Flite Vanes™, ...) on arrow shafts up to 7,2mm (9/32") Nock-out-diameter.
With the Beiter Tri-Liner it is easily possible to adjust the position of fletching in relation to the string, as well as the distance to the end of the shaft.
The Tri-Liner can be used for different Vane lengths, for Left hand or Right hand archers, as well as for Recurve or Compound archers.
In fact the positioning ring allows many different adjustments and an exact orientation of nock and fletching.
The included red Tabs are for the exact positioning of the fletching in length and distance to the nock. Additionally they help to draw the line in the correct length.
You may clean the tool also with Acetone if desired.
Please refer to our Instructions Guide to know how to use the Beiter Tri-Liner and achieve best results with it.
The ideal partner for the Tri-Liner is the Beiter Wing-Holder, which is only available for vanes with 1 3/4" length.