Top Hat Protector Rings 12
$28.57
Protective sleeve that could be used on the front and/or back end of the shaft to prevent splitting of the shaft upon impact.
Can be used with regular inserts, glue-in points, nock-adapters and nocks. (Will not work with Dura-Point system, Protector-Points and Protector-Inserts)
Protector Rings are machined from stainless steel and weigh appr. 5 grains ea.
Easton 3.2MM X10 Parallel Pro
Easton 3.2MM X10 Parallel Pro Spine | Published shaft OD | Closest TopHat protector ring | |
340 | .215" / approx. 5.46 mm | 5.45 mm | |
380 | .209" / approx. 5.31 mm | 5.30 mm | |
420 | .207" / approx. 5.26 mm | 5.26 mm ideal / 5.23 mm possible with fitting | |
460 | .203" / approx. 5.16 mm | 5.15 mm | |
500 | .200" / approx. 5.08 mm | 5.08 mm ideal | |
550 | .197" / approx. 5.00 mm | 5.00 mm | |
600 | .194" / approx. 4.93 mm | 4.91 mm ideal / 5.00 mm possible within oversize tolerance | |
650 | .191" / approx. 4.85 mm | 4.84 mm | |
700 | .187" / approx. 4.75 mm | 4.78 mm or 4.69 mm depending on preferred fit | |
750 | .186" / approx. 4.72 mm | 4.69 mm | |
800 | .181" / approx. 4.60 mm | 4.65 mm | |
900 | .180" / approx. 4.57 mm | 4.65 mm within oversize tolerance / 4.52 mm if a tighter undersize fit is preferred | |
1000 | .177" / approx. 4.50 mm | 4.52 mm |
Quantity