HOYT Recurve Grand Prix XCEED Riser*

**Average turn around time is 1-2 weeks based on stock built - Please phone to confirm**

GRAND PRIX SERIES TARGET RECURVES
TAKE YOUR PERFORMANCE TO THE NEXT LEVEL WITH THE ORIGINAL DOVETAIL TAKEDOWN SYSTEM—STILL THE BEST. IMITATED BUT NEVER EQUALED.

RISER LENGTH: 25"

MASS WEIGHT: 2.8 LBS / 1,270 G

GEOMETRY: ORIGINAL HOYT GEOMETRY

OVERALL LENGTH W/SHORT LIMBS: 66"

OVERALL LENGTH W/MEDIUM LIMBS: 68"

OVERALL LENGTH W/LONG LIMBS: 70"

LIMB FITTING SYSTEM: GRAND PRIX (ILF)

GRAND PRIX STRING TENSION TECHNOLOGY
This unprecedented advancement and innovation in recurve archery allows you to adjust the string tension, which enables you to customize the feel of your limbs. By making small adjustments to the limb rockers, it effectively makes the limb feel shorter or longer, thus increasing or decreasing string tension. There are three distinct limb rocker settings you can choose from. With the limb rockers in position number one, referred to as the Ultimate Performance Setting, you will achieve the highest level of string tension, which is optimal for those looking for a more aggressive pull through the clicker in high pressure, high adrenaline situations. On the opposite adjustment spectrum, position number three, referred to as the Ultimate Smoothness Setting, the string tension is the lowest. This helps the limbs feel smoother through the clicker, especially during the last 1 to 2 millimeters of the draw cycle. Position number 2 is considered a hybrid setting, for those looking for a combination of performance and smoothness. While this new technology allows archers to customize the feel of their limbs by adjusting their string tension, no changes are made to the overall tune of the bow for ultimate consistency and accuracy. This Hoyt patent-pending technology is truly a break-through in recurve archery.

GRAND PRIX PRO SERIES DOVETAIL ADJUSTMENT AND TILLER BOLT
Built to maximize accuracy and consistency, our new Dovetail Adjustment Block allows for micro adjustments for an ultra-precise tune all while the bow is strung, and the new tiller bolts create a rock-solid connection of limbs to riser.

GRAND PRIX VERTATUNE CLICKER PLATES
The Xceed comes standard with three options of verta-tune rest plates, high, middle and low allowing for customization of rest height position for optimized tuning and performance regardless of shooting style.

XCEED RECURVE RISER WEIGHT
Designed especially for barebow archers, or any other shooters looking to add extra weight to their bow for a steady aim, this sleek system integrates perfectly with the riser and is available in a 32-ounce stainless steel or 15-ounce aluminum version. You can also mix and match between the stainless steel and aluminum plates to customize the weight you’re after. (Each stainless steel plate weighs 7.9 oz. and each aluminum plate weighs 2.7 oz.)

GRAND PRIX INTEGRATED POCKET WEIGHT SYSTEM
The Grand Prix Integrated Pocket Weights (sold separately) provide shooters with advanced options to customize the feel of their bow by adding weight to the upper and/or lower section of the bow riser. Both the top and bottom limb pockets feature recesses that allow up to two 1.5-ounce weights to be added in each location for a total possible weight increase of up to 6 oz. When installed, these custom weights become integrated with the riser for a clean, sleek, vibration free fit. Available exclusively on Xceed.

GRAND PRIX DYNAMIC FLEX CONTROL
Every section of the riser has been meticulously engineered to control flex throughout the entire shot cycle, maximizing efficiency and improving accuracy. This is the most accurate Grand Prix recurve riser we’ve ever built.

GRAND PRIX DYNAMIC BALANCE DESIGN
By engineering more of the riser mass to the pocket ends we’ve created our most balanced Grand Prix recurve riser ever. This specific weight distribution also creates a very crisp, clean shot for ultimate accuracy and consistency. One shot and you’ll immediately feel the difference.