Pats Archery

  • Easton Triumph Shaft+Points+Pins 12*

Easton Triumph Shaft+Points+Pins 12*

  • Price:AUD$139.40

  • Ex Tax: AUD$126.73
  • Availability: In Stock
  • Model: Easton Triumph Shaft+Points+Pins 12*

Available Options:


Easton Triumph Shaft+Points+Pins 12*

Easton Triumph Shaft+Points+Pins 12*

 

Parts loose


350 Spine + 200gr Point perfect for 60lb Bow at 27-28" Shaft Length

400 Spine + 125gr Point perfect for 60lb Bow at 26-27" Shaft Length


Triumph is engineered for superior accuracy and performance in even the

toughest target materials, and every size Triumph is designed at the

maximum allowable diameter for World Archery competition. With a choice

of four sizes, three nock systems, and five point weights, there’s a Triumph

for every competitive bow style and required state of tune.

Triumph’s internal armor system provides a natural advantage in terms of

front-of-center balance, providing even more stability and accuracy,

without compromising dynamic spine.

Note: Triumph shafts are precision-cut and squared at the front for optimal

point alignment and fit, and should only be cut from the rear before nock

system installation and assembly. Cutting the shaft at the point end will

reduce the effectiveness of the internal armor system and potentially

decrease durability in hard targets. This will void warranty.

Cutting Instructions: Use only a high-speed, thin-blade pro shop saw for

cutting Triumph shafts. NOTE: Cut shafts ONLY from the rear, designated

by the printed gold band. DO NOT cut the end with the aluminum armor

core.

Point Installation: Triumph shafts are compatible with the use of Easton

low-temperature hot melt cement for point installation. Easton

recommends use of a gel-type cyanoacrylate for UNI bushing installation,

and a small drop of hot melt for installation of PIN Nock adapters.

Triumph Features:

Straightness: ± .002”

Weight Tolerance: ± 1 grain

All sizes at World Archery maximum allowed 9.3 mm outside diameter

Black, smooth matte finish

Multi-layer wrapped carbon fibers

S or G UNI Bushing included

Pin nock adapter sold separately

Points fit all shaft sizes, sold separately, available weights: 100, 125, 150, 175 and

200 grains

There are no reviews for this product.

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha

Tags: Easton Triumph Shaft+Points+Pins 12* Parts loose 350 Spine + 200gr Point perfect for 60lb Bow at 27-28" Shaft Length 400 Spine + 125gr Point perfect for 60lb Bow at 26-27" Shaft Length Triumph is engineered for superior accuracy and performance in even the toughest target materials, and every size Triumph is designed at the maximum allowable diameter for World Archery competition. With a choice of four sizes, three nock systems, and five point weights, there’s a Triumph for every competitive bow style and required state of tune. Triumph’s internal armor system provides a natural advantage in terms of front-of-center balance, providing even more stability and accuracy, without compromising dynamic spine. Note: Triumph shafts are precision-cut and squared at the front for optimal point alignment and fit, and should only be cut from the rear before nock system installation and assembly. Cutting the shaft at the point end will reduce the effectiveness of the internal armor system and potentially decrease durability in hard targets. This will void warranty. Cutting Instructions: Use only a high-speed, thin-blade pro shop saw for cutting Triumph shafts. NOTE: Cut shafts ONLY from the rear, designated by the printed gold band. DO NOT cut the end with the aluminum armor core. Point Installation: Triumph shafts are compatible with the use of Easton low-temperature hot melt cement for point installation. Easton recommends use of a gel-type cyanoacrylate for UNI bushing installation, and a small drop of hot melt for installation of PIN Nock adapters. Triumph Features: Straightness: ± .002” Weight Tolerance: ± 1 grain All sizes at World Archery maximum allowed 9.3 mm outside diameter Black, smooth matte finish Multi-layer wrapped carbon fibers S or G UNI Bushing included Pin nock adapter sold separately Points fit all shaft sizes, sold separately, available weights: 100, 125, 150, 175 and 200 grains